GAE Series
25 Amp Rating
- CONTACT & COIL
- CHARACTERISTICS
- Model Info.
- Drawings & Dimensions
- Precautions
Description
| CONTACT RATINGS | |||
|---|---|---|---|
| Contact Form | 1A, 1C, 2A, 2C | ||
| Contact Res. | ≤100mΩ | ||
| Contact Material | Ag Alloy (AgSnO2, AgNi) | ||
| Rated Load | FORM A | FORM C | |
| NO | NC | ||
| 25A 16VDC | 25A 16VDC | 15A 16VDC | |
| Max. Current | 25A | 15A | |
| Max. Power | 400W | 240W | |
| Max. Voltage | 16VDC | ||
| Min. Load | 1A at 6VDC | ||
| COIL DATA | |||||
|---|---|---|---|---|---|
| STANDARD | Approx. 640mW (800mW on Request) | ||||
| Rated Voltage (VDC) | Operate Voltage (VDC) | Release Voltage (VDC) | Max. Voltage (VDC) | Nominal Current (mA) | Coil Res. (Ω)±10% |
| 5 | ≤3 | ≥0.5 | 8.3 | 128 | 39 |
| 12 | ≤7.2 | ≥1.2 | 19.9 | 53.3 | 225 |
| 24 | ≤14.4 | ≥2.4 | 39.8 | 26.67 | 900 |
Additional information
| Weight | 4 g |
|---|---|
| Dimensions | 14 × 7.2 × 13.5 mm |
| Max. Capacity | 25A 16VDC |
| Contact Form | 1 Form A, 1 Form C, 2 Form A, 2 Form C |
| Operate Time | ≤10ms |
| Release Time | ≤10ms |
| Insulation Resistance | 100MΩ (@500VDC) |
| Dielectric Strength (I/O) | 500VAC 1min |
| Dielectric Strength (O/O) | 500VAC 1min |
| Shock Resistance | Non-energized: 10G; Destructiion: 100G; Malfunction: 10G |
| Vibration Resistance | Destruction: 10 to 55Hz (Double Amplitude); Malfunction: 10 to 55Hz (Double Amplitude) |
| Ambient Temperature | Operating: -40℃ – 125℃ |
| Ambient Humidity | Operating: 5% – 85% |
| Mount Type | PCB Pin (DIP/TH) |
| Color | Black |
| Model Number Legend | |||||||
|---|---|---|---|---|---|---|---|
| GAE | – | S | 1 | C | / | 24VDC | |
| (1) | (2) | (3) | (4) | ||||
| (1) | Seal Type: | Nil: Flux Proofed; X: Sealed Type. | |||||
| (2) | NO of Pole: | 1: Single Pole; 2: Double Pole. | |||||
| (3) | Contact Form: | A: Form A / Normally Open; C: Form C / Change Over. | |||||
| (4) | Coil Voltage: | X / XX VDC: DC Coil Voltage Value. | |||||
| Major Model Ordering Chart | ||||
|---|---|---|---|---|
| Enclosure Rating | Contact Form | Coil Power | Model | Coil Voltage |
| Sealed Type | SPST | 0.64W | GAE-S1A | 5VDC 12VDC 24VDC |
| SPDT | GAE-S1C | |||
| DPST | GAE-S2A | |||
| DPDT | GAE-S2C | |||
When ordering, add rated coil voltage to model.
PRECAUTIONS REGARDING COIL INPUT
For the operation of AC relays, the power source is almost always a commercial frequency (50 or 60 Hz) with standard voltages of 6, 12, 24, 48, 120, 230 and 240VAC. Due to this, when the voltage is ohter than the standard voltage, the product becomes special model.
PRECAUTIONS REGARDING CONTACT
For the operation of AC relays, the power source is almost always a commercial frequency (50 or 60 Hz) with standard voltages of 6, 12, 24, 48, 120, 230 and 240VAC. Due to this, when the voltage is ohter than the standard voltage, the product becomes special model.
PRECAUTIONS REGARDING SOLDERING CONDITION
We recommend wave solder, the recommended temperature is 240°C 464°F to 260°C 500°F, and the time is 2s to 5s, time should no longer than 2s when temperature reach 250°C 500°F or above.