Featured

GPD Series

40 Amp50 Amp Rating

  • 32.4 x 27.4 x 19.8(H) mm.
  • 50A Max Switching Capacity.
  • Widely Used Cube Type Relay.
  • Class F Insulation/GWT Complaint/HF and Customised Types Available.
  • Certified with    
Clear

Description

CONTACT RATINGS
Contact Form 1A, 1B, 1C
Contact Res. ≤50mΩ
Contact Material Ag Alloy (AgSnO2, AgSnO2In2O3, AgCdO)
Rated Load FORM A FORM C
NO NC
50A 240VAC (H Type)
50A 28VDC (H Type)
40A 240VAC
40A 28VDC
50A 240VAC (H Type)
50A 28VDC (H Type)
40A 240VAC
40A 28VDC
35A 240VAC (H Type)
35A 28VDC (H Type)
30A 240VAC
30A 28VDC
Max. Current 50A 35A
Max. Power 12,000VA/1,400W 1,250VA/980W
Max. Voltage 240VAC/28VDC
Min. Load 500mA at 5VDC


COIL DATA
DC Coil Approx. 900mW
Rated Voltage (VDC) Operate Voltage (VDC) Release Voltage (VDC) Max. Voltage (VDC) Nominal Current (mA) Coil Res. (Ω)±10%
5 ≤3.75 ≥0.5 6.5 180 27.8
6 ≤4.5 ≥0.6 7.8 150 40
9 ≤6.75 ≥0.9 11.7 100 90
12 ≤9 ≥1.2 15.6 75 160
18 ≤13.5 ≥1.8 23.4 50 360
24 ≤18 ≥2.4 31.2 37.5 640
48 ≤36 ≥4.8 62.4 18.75 2,560
110 ≤82.5 ≥11 143 8.18 13,444.4
AC Coil Approx. 2VA
Rated Voltage (VDC) Operate Voltage (VDC) Release Voltage (VDC) Max. Voltage (VDC) Nominal Current (mA) Coil Res. (Ω)±10%
24 ≤19.2 ≥4.8 31.2 83.33 100
120 ≤96 ≥24 156 16.67 2,500
220 ≤176 ≥44 286 9.09 13,490



Additional information

Weight 30 g
Dimensions 32.4 × 27.4 × 19.8 mm
Certified Approval

cULus, TUV

Max. Capacity

40A 240VAC/28VDC, 50A 240VAC/28VDC

Contact Form

1 Form A, 1 Form B, 1 Form C

Operate Time

≤15ms

Release Time

≤10ms

Coil Power

0.9W, 2VA

Insulation Resistance

100MΩ (@500VDC)

Dielectric Strength (I/O)

4,500VAC 1min

Dielectric Strength (O/O)

1,500VAC 1min

Impluse Withstand Voltage

6kV (1.2 x 50μs)

Shock Resistance

Non-energized: 10G; Destructiion: 100G; Malfunction: 10G

Vibration Resistance

Destruction: 10 to 55Hz (Double Amplitude); Malfunction: 10 to 55Hz (Double Amplitude)

Ambient Temperature

Operating: -40℃ – 105℃

Ambient Humidity

Operating: 5% – 85%

Mount Type

Vertical Quick Connector, PCB Pin (DIP/TH)

Color

Black, White

Model Number Legend
GPD S 1 A D H K F 1 24VDC
(1) (2) (3) (4) (5) (6) (7) (8) (9)
(1) Enclosure Rating: Nil: Flux Proof; S: Plastic Sealed.
(2) NO of Pole: 1: Single Pole.
(3) Contact Form: A: Form A / Normally Open; B: Form B / Normally Closed; C: Form C / Change Over.
(4) Contact Material: Nil: Silver Alloy (ROHS Complaint); D: Ag Alloy (Other Materials).
(5)* Contact Capacity: Nil: Standard Capacity (up to 40Amp); H: High Capacity (up to 50Amp).
(6)* Coil Power: Nil: Standard Coil Power: 0.9W for DC, 2VA for AC; K: High Coil Power: 1.2W for DC;
(7)* Insulation Class: Nil: Standard Insulation – Class B; F: Insulation – Class F.
(8)* Quick Connector Position: Nil: Same Side; 1: Two Sides.
(9)* Coil Voltage: X / XX / XXX VDC or VAC: Coil Voltage Value.
*: Shown as suffix, not show in model number.



Major Model Ordering Chart
Enclosure Rating Contact Form Capacity Coil Power Insulation Model Coil Voltage
Flux Proof SPST NO: 40A 2VA Class B GPD-1A 24VAC
120VAC
220VAC
0.9W 5VDC
6VDC
9VDC
12VDC
18VDC
24VDC
48VDC
110VDC
SPDT NO: 40A
NC: 30A
GPD-1C 5VDC
12VDC
24VDC
48VDC
110VDC




For high power type, we suggest to select flux proof version for better heat distribution if the relay will not exposed in high humidity/sulphide/dust environment.
For standard type, materials used already meet Class B insulation requirements.
When ordering, add rated coil voltage to model.

Example: GPD-1A /12VDC





PRECAUTIONS REGARDING COIL INPUT

For the operation of AC relays, the power source is almost always a commercial frequency (50 or 60 Hz) with standard voltages of 6, 12, 24, 48, 120, 230 and 240VAC. Due to this, when the voltage is ohter than the standard voltage, the product becomes special model.

PRECAUTIONS REGARDING CONTACT

For the operation of AC relays, the power source is almost always a commercial frequency (50 or 60 Hz) with standard voltages of 6, 12, 24, 48, 120, 230 and 240VAC. Due to this, when the voltage is ohter than the standard voltage, the product becomes special model.

PRECAUTIONS REGARDING SOLDERING CONDITION

We recommend wave solder, the recommended temperature is 240°C 464°F to 260°C 500°F, and the time is 2s to 5s, time should no longer than 2s when temperature reach 250°C 500°F or above.

You've just added this product to the cart: