GPF Series
25 Amp Rating
- 32.2 x 15.8 x 23.3(H) mm.
- 25A Max Switching Capacity.
- Dielectric Strength > 4KV, impluse strength up to 8KV.
- Available in PCB pins and vertical quick connectors.
- Certified with
- CONTACT & COIL
- CHARACTERISTICS
- Model Info.
- Drawings & Dimensions
- Precautions
Description
| CONTACT RATINGS | |||
|---|---|---|---|
| Contact Form | 1A | ||
| Contact Res. | ≤100mΩ | ||
| Contact Material | Ag Alloy (AgSnO2, AgSnO2In2O3) | ||
| Rated Load | FORM A | ||
| 25A 250VAC 2HP 240VAC |
|||
| Max. Current | 25A | ||
| Max. Power | 6,250VA | ||
| Max. Voltage | 250VAC | ||
| Min. Load | 100mA at 5VDC | ||
| COIL DATA | |||||
|---|---|---|---|---|---|
| STANDARD | Approx. 900mW | ||||
| Rated Voltage (VDC) | Operate Voltage (VDC) | Release Voltage (VDC) | Max. Voltage (VDC) | Nominal Current (mA) | Coil Res. (Ω)±10% |
| 5 | ≤3.75 | ≥0.5 | 6.5 | 180 | 27.8 |
| 6 | ≤4.5 | ≥0.6 | 7.8 | 150 | 40 |
| 9 | ≤6.75 | ≥0.9 | 11.7 | 100 | 90 |
| 12 | ≤9 | ≥1.2 | 15.6 | 75 | 160 |
| 18 | ≤13.5 | ≥1.8 | 23.4 | 50 | 360 |
| 24 | ≤18 | ≥2.4 | 31.2 | 37.5 | 640 |
| 48 | ≤36 | ≥4.8 | 62.4 | 18.75 | 2,560 |
Additional information
| Weight | 23 g |
|---|---|
| Dimensions | 32.2 × 15.8 × 23.3 mm |
| Certified Approval | cULus |
| Max. Capacity | 25A 250VAC, 2HP 240VAC |
| Contact Form | 1 Form A |
| Operate Time | ≤15ms |
| Release Time | ≤5ms |
| Coil Power | 0.9W |
| Insulation Resistance | 1,000MΩ (@500VDC) |
| Dielectric Strength (I/O) | 4,500VAC 1min |
| Dielectric Strength (O/O) | 1,000VAC 1min |
| Impluse Withstand Voltage | 8kV (1.2 x 50μs) |
| Shock Resistance | Non-energized: 10G; Destructiion: 100G; Malfunction: 10G |
| Vibration Resistance | Destruction: 10 to 55Hz (Double Amplitude); Malfunction: 10 to 55Hz (Double Amplitude) |
| Ambient Temperature | Operating: -40℃ – 105℃ |
| Ambient Humidity | Operating: 5% – 85% |
| Mount Type | Vertical Quick Connector, PCB Pin (DIP/TH) |
| Color | Black |
| Model Number Legend | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| GPF | – | S | 1 | A | – | V | 24VDC | |||
| (1) | (2) | (3) | (4) | (5) | ||||||
| (1) | Seal Type: | Nil: Flux Proof (RTII); H: Fully Sealed (RTIII). | ||||||||
| (2) | NO of Pole: | 1: Single Pole. | ||||||||
| (3) | Contact Form: | A: Form A / Normally Open. | ||||||||
| (4) | Mount Type: | Nil: PCB Pins; V: PCB Pins with Vertical Q.C.; T: PCB Pins with Horizontal Q.C. | ||||||||
| (5) | Coil Voltage: | X / XX: DC Coil Voltage Value. | ||||||||
| Major Model Ordering Chart | ||||||
|---|---|---|---|---|---|---|
| Enclosure Rating | Contact Form | Capacity | Mount Type | Insulation | Model | Coil Voltage |
| Flux Proof | SPST | NO: 25A | PCB Pins | Class F | GPF-1A | 5VDC 12VDC 24VDC |
| PCB Pins with Vertical Q.C. | GPF-1A-V | |||||
For standard type, materials used already meet Class F insulation requirements.
When ordering, add rated coil voltage to model.
PRECAUTIONS REGARDING COIL INPUT
For the operation of AC relays, the power source is almost always a commercial frequency (50 or 60 Hz) with standard voltages of 6, 12, 24, 48, 120, 230 and 240VAC. Due to this, when the voltage is ohter than the standard voltage, the product becomes special model.
PRECAUTIONS REGARDING CONTACT
For the operation of AC relays, the power source is almost always a commercial frequency (50 or 60 Hz) with standard voltages of 6, 12, 24, 48, 120, 230 and 240VAC. Due to this, when the voltage is ohter than the standard voltage, the product becomes special model.
PRECAUTIONS REGARDING SOLDERING CONDITION
We recommend wave solder, the recommended temperature is 240°C 464°F to 260°C 500°F, and the time is 2s to 5s, time should no longer than 2s when temperature reach 250°C 500°F or above.
